------------------------------------------------------------------ DHI E-NEWS -- Vol 2, Issue 3 -- 2002 SEP 06 ------------------------------------------------------------------ In this Issue:  General News  New Literature/Documentation  New and Upgraded Software Releases To minimize the size of this letter, news items are highly condensed. For additional information on an item that may be of interest to you, click on the hotlink that is associated with the item. ------------------------------------------------------------------ GENERAL NEWS ------------------------------------------------------------------  DHI releases 3 new pressure and flow products with significant advances in ranges covered, uncertainty levels, automation and other features: - PPC3(tm) pressure controller/calibrator with % of reading uncertainty, AutoRange feature and open architecture. http://www.dhinstruments.com/prod1/ppc.htm - FPG8601(tm) fundamental automated calibration system for very low gauge and absolute pressure. Covers ranges as low as 10 Pa (100 mTorr, 0.1 in. H2O). http://www.dhinstruments.com/prod1/pgs.htm - molbloc-S(R) sonic nozzle based elements for flow up to 2 000 slm using molbox1 and/or molbox RFM. http://www.dhinstruments.com/prod1/f.htm  NEW DISTRIBUTOR - Contact Servicios y Consultoria Industrial for DHI Calibration Solutions for Pressure and Flow in VENEZUELA. http://www.dhinstruments.com/find1/caribb.htm  EVENTS - Visit DHI in your area at these conferences/seminars: - 2002 > SEP 16 to 18, SEMICON Taiwan, Taipei TAIWAN (Booth 2635) > SEP 16 to 20, MSV 2002 44th International Engineering Fair, Brno CZECH REPUBLIC (on booth C/17 of D-Ex Limited s.r.o) > NOV 04 to 08, HET Instrument 2002, Utrecht THE NETHERLANDS (on the booth of Minerva I.P. & M. B.V.) > NOV 19 to 23, BIAS, Milan ITALY (On the booth the Delo Process) > NOV 26 to 30, Expoquimia, Barcelona SPAIN, (on the booth of Gometrics) > DEC 04 to 06, SEMICON Japan, Chiba JAPAN http://www.dhinstruments.com/even1/index.htm  TRAINING COURSES - Pressure and flow calibration courses Held at DHI in Phoenix AZ USA: - Precision Pressure Calibration > 2002 OCT 21 to 25 > 2003 MAR 31 to APR 04 > 2003 SEP 22 to 26 > 2003 NOV 10 to 14 - Advanced Pressure Metrology Using Piston Gauges > 2003 MAY 05 to 09 - Gas Flow Calibration Using molbloc/molbox > 2002 OCT 16 to 18 > 2003 FEB 03 to 06 > 2003 JUN 02 to 05 > 2003 OCT 13 to 16 Customized training and consultation is also available at your location focusing on your specific instruments and applications. http://www.dhinstruments.com/serv1/training/courses.htm Online enrollment available at: http://www.dhinstruments.com/serv1/training/couenrol.htm ------------------------------------------------------------------ NEW LITERATURE/DOCUMENTATION ------------------------------------------------------------------ PRODUCT BROCHURES:  PPC3 NEW Pressure Controller/Calibrator http://www.dhinstruments.com/prod1/ppc.htm  FPG8601 NEW Forced Balanced Piston Gauge http://www.dhinstruments.com/prod1/pgs.htm  molbloc-S NEW Critical Flow nozzle based elements for flow up to 2 000 slm http://www.dhinstruments.com/prod1/f.htm TECHNICAL DOCUMENTS:  A Forced Balance Piston Gauge for Very Low Gauge And Absolute Pressures, presented at 2002 NCSLI Conference in San Diego, CA http://www.dhinstruments.com/prod1/pgs.htm#techdocs  Improvements In The Determination Of Effective Area Through A Piston-Cylinder Pressure Calibration Chain, presented at 2002 NCSLI Conference in San Diego, CA http://www.dhinstruments.com/prod1/pgs.htm#techdocs  Hardware Setup and Application Notes for Calibrating FTS Device with molbloc/molbox, DHI Tech Note No. 2060TN04 http://www.dhinstruments.com/prod1/f.htm#technotes  An Automated Controller/Calibrator for Low Differential Pressure Around Atmosphere - Presented by DHI 2002 MAY 29 at Symposio de Metrologia in Queretaro MEXICO. Awarded "Best Foreign Paper." http://www.dhinstruments.com/prod1/ppc.htm#techdocs USER'S MANUALS:  PG7000(tm) Piston Gauges manual, rev k is available under SUPPORT. New PG7202 is included in this manual with previously covered models PG7102, PG7302 & PG7601. http://www.dhinstruments.com/supp1/man.htm INSTRUCTION SHEETS:  Replacement Power Supply Kit for RPM3 or molbox RFM installation instruction sheet http://www.dhinstruments.com/supp1/instruct.htm#560047  PK-7600-VAC-VENT High Flow Vent Valve Kit Vacuum Vent Valve Kit for PG7601/7607 installation instruction sheet http://www.dhinstruments.com/supp1/instruct.htm#560046 ------------------------------------------------------------------ PC BASED SOFTWARE UPGRADES (Available for Free Download) ------------------------------------------------------------------  CalTool for RPTs(tm) Ver 1.00b is available under PC BASED SOFTWARE. CalTool for RPTsT is a PC based calibration utility for reference pressure transducers (RPTs) in DHI products. http://www.dhinstruments.com/supp1/software/pcctrpt.htm  WinFlash(tm) Ver 1.0i is available under PC BASED SOFTWARE. WinFlash is a Utility program used to install embedded software into DHI products with FLASH memory. http://www.dhinstruments.com/supp1/software/pcwinfl.htm ------------------------------------------------------------------ EMBEDDED SOFTWARE UPGRADES (Available for Free Download) ------------------------------------------------------------------  PPC2+ Ver. 2.02f http://www.dhinstruments.com/supp1/software/embppc2p.htm  PG7000 Ver 2.04 http://www.dhinstruments.com/supp1/software/embpg203.htm ------------------------------------------------------------------ ------------------------------------------------------------------ You have received this message because our records indicate you are an active subscriber to DHI E-News. To remove yourself from the active subscriber list, visit the following link: http://www.dhinstruments.com/subscribe/gbkun.htm ------------------------------------------------------------------ (c)2002 DH Instruments, Inc. 4765 E Beautiful Ln - Phoenix AZ 85044-5318 - USA All rights reserved. ------------------------------------------------------------------