Pressure and Flow Calibration Software

Fluke Corporation, DH Instruments Division   Fluke Corporation
  DH Instruments Division
  Phone: 602.431.9100
  Fax: 602.431.9559

Visit other Fluke companies for calibration equipment and services in electrical, power, pressure, flow, RF, and more.

www.fluke.com

Embedded [pressure ] [flow] [USAF]

Flow

TITLE	VER	USE WITH
MFC-CB™	1.00b	MFC-CB
Updates Include:
Ver 1.00b (05 Oct 19) CHG Increase resolution of remote measurement replies from 100 to 10uV. Ver 1.00a (01 Oct 25) FIX: "VSENSE" command would not accept a suffix. CHG: Change the units displayed on the front panel to 'V' when the ''VOUT=" command is used, and to 'mA' when the "COUT=" command is used. Ver 1.00 (01 Aug 14) Inital release of software for new control box for MFCs and MFMs

Download File:

FREE Download
mfccb.bin (157 kb)
2005.10.19

Instructions:

Contact
Fluke/DHI if...

You want to upgrade from versions before 4.02.

Download the file.

Run Winflash and select the file downloaded as the file to write to the product.

Make sure the correct COM port of the product is connected to a RS232 port on the host PC.

Use a null modem cable to COM2 port of PG7000 Piston Gauge.

Use a standard RS232 cable to COM1 port of PPC, PPC, RPM and molbox.

The updating of embedded software should only be performed after given specific instructions to do so from a DHI Authorized Service Center.

If the update isn't performed properly, your product will be inoperable until it is.