Embedded software is the software within the product that controls the product's operations.

These pages offer access to the latest releases of embedded software.

If your product has an model number ending in “-AF”, it requires specific “-AF” embedded software (see [USAF] 

The updating of embedded software should only be performed after given specific instructions to do so from a DHI Authorized Service Providers. If the update isn't performed properly, your product will be inoperable until it is.

Embedded software files are not compressed and the WinFlash™ program is required to write them to the corresponding product. When using Winflash, select the downloaded file as the file to write to the product.

Make sure the correct COM port of the product is connected to a RS232 port on the host PC. Use a null modem cable to COM2 port of PG7000 Piston Gauge. Use a standard RS232 cable to COM1 port of all other DHI equipment.